Myk Arment Aquaarm Top Guard

MYK Arment AquaArm Top Guard — often written AquaArm TopGuard — is a two-component cementitious waterproofing coating used in construction to protect concrete and masonry surfaces from water, moisture, and abrasion. 🧱 What It Is A cementitious, polymer dispersion based flexible protective coating that forms a waterproof barrier. It comes in two parts: a powder component (cementitious) and a liquid polymer component that are mixed together before application. After mixing it creates a flexible and breathable membrane on the surface. 💧 Key Uses AquaArm Top Guard is typically used for waterproofing and protective coating on: Balconies and chajjas (overhangs) Toilets and bathrooms Roofs and terraces Other concrete and masonry surfaces where water resistance is needed 🛠️ Features & Benefits Water & moisture resistant: Helps prevent water penetration and dampness. Flexible: Accommodates small movements in the substrate. Breathable: Allows substrate to release moisture without trapping it. Self-curing: Does not require elaborate curing procedures under normal conditions. Abrasion resistant: Protects the surface from wear due to foot traffic or environmental exposure. 📦 Application Overview Surface Preparation: Ensure surface is clean, sound, and free of loose particles. Mixing: Combine the powder (Component A) with the liquid polymer (Component B) in the recommended ratio (often ~3:1) until lump-free. Application: Apply in two coats — first horizontally, then vertically once tacky. Curing: Under normal conditions, the coating self-cures and can tolerate rain or foot traffic after appropriate time. 📌 Typical Packaging & Sizes Available in composite packs combining powder and liquid (e.g., 3 kg, 8 kg, 15 kg, 20 kg, 30 kg, 40 kg, etc.). Shelf life usually around 24 months when stored properly. 🧰 Where It's Used Commonly used by builders, contractors, and DIYers for areas requiring reliable waterproofing, especially on roofs, terraces, bathrooms, and exposed concrete surfaces.