Manual Charpy Notch Broaching Machine, Model Name/Number: HBM-2, Machine Capacity: 2 & 5 mm

Manual Notch Cutting Machine: A simple hand-v ice for holding the specimen is built on to the machine. The tooling includes the adjustors & end stops necessary to ensure notch-depth & position are correctly set. The approx weight is around 35 kg The machine dimension (approx.) 210mm X 210mm X 1050mm.Motorised Notch Cutting Machine: The machine is a free standing unit built sturdily. The broach is mounted in a carrier, which is drawn by a twin lead screwmechanism through the full stroke with the help of 0.5 HP motor. V / U notch Broaching Machine fixture to clamp the specimen. The toolingincludes the vice for holding the 10mm X 10mm specimen. The tooling/ fixtures include the adjustors & the end stop necessary to ensure the notch depth & position accurately as per the Standards. The approx. weight is around 100 kg. The machine dimension (approx.) 385mm X 385mm X 1050mm. The machine will broach a notch in 10mm square material to thefollowing standards: * A.S.T.M. A370, E23 * B.S.131: PART I, II, III, IV, and BS EN 10045-1993 * DIN 50 115 * IS 1598 1977, IS 1757 1988, IS 1499 1977Notch :Broaching machine suitable for ferrous & non-ferrous material for sample preparation of ‘ V ' & ‘U' notches for Impact Testing Machine.Broaching Machine can cut correct ‘ U ‘ & ‘ V ‘ notches in Charpy or Izod specimen by means of amulti-toothed broach.