PN16 C I Sluice Valve Coimbatore, Flange, 1.5"" To 36""

Cast Iron Sluice Valves (Non-Rising Spindle) are best suited for services that require infrequent valve operation, and where the wedge is kept either fully opened or fully closed. It offers the ultimate dependable service wherever minimum pressure drop is important. Design Std.: IS:14846. Bolted Bonnet, inside screw, Non-Rising Stem. Solid Wedge, Metal to Metal seating. Gun Metal Body & Wedge rings, Stainless Steel Stem. Flanged ends as per IS 1538 (FF). Compact & rigid structure. Provided full flow with minimal pressure drop. Small opening and closing torque. Using Non-Asbestos packing, reliable sealing, light and flexible Operation. Robust construction of hand wheel in open spoke design. Provision for re-packing under pressure in the installed condition. Easy visual control of open/closed position marked on the hand wheel. Operation mode manual, gear, electric, pneumatic. Available with open-shut indicator & locking arrangement on request. Widely used in water distribution, power plants, and pipeline for access or cut off the medium pipeline opening and closing devices. END CONNECTION Flanged as per IS:1538 (FF). Flange drilling as per other standards also available upon request. UTILISATION & SERVICE "LEADER" Cast Iron Sluice valves are suitable for above-ground installations. Best suited for potable water, treated fresh water, neutral liquids & some gases. WORKING PRESSURE Maximum Working Pressure: (PN 1.6) 16 Bar. See Pressure / Temperature Diagram. TEMPERATURE LIMITS: Maximum Working Temperature: 45°C. See Pressure / Temperature Diagram. TEST PRESSURE (Hydrostatic) RatingPN-1.6 Body (Hyd.) 2.4 MPa Seat (Hyd.) 1.6 MPa