Shalipoxy CTE 103, For Metal, Black

Apply ShaliPoxy® CTE 103 I direct to metal immediately after blasting or prime surface with any epoxy primer. We recommend ShaliPrime® Zn Ph 60. Allow the primer to touch dry. • Apply first coat of ShaliPoxy® CTE 103 I on the prepared surface by brush / roller /spray. • Allow it to touch dry as per our technical data sheet (depending on ambient condition) • The 2nd coat, if required should be applied only after the first coat has dried (4 - 7 hours) at 30°C. If the application of the 2nd coat is delayed by 16 hours, wipe with a suitable solvent before application. • In case of airless spray, use standard equipment having pump ratio of 60:1 or higher, tip size of 0.58 - 0.88 mm and tip pressure 210 - 250 kg / cm2.