Mark G 15 (G 1/2"") Compressed Air Coalescing Filters

Available in C and V series.Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.Increased user-friendliness and reliability via push-on element.Protection paper avoids direct contact between filter media and stainless steel filter core.Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.Epoxy sealed caps for reliable filtration.Internal ribs support the element and facilitate the route of oil droplets.C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.