MS Portable Dust Collector, For Buffing/ Blending
₹45,000
Seller : Elevation Engineering
Specification
- usage
- Powder Coating Industry
- voltage
- 380 V
- material
- Mild Steel
- mounting
- Trailer Mounted
- power kw
- 5.5
- frequency
- 50 HZ
- dimensions
- 1x1x3feet(LxWxH)
- filtration
- 10 Micron
- inlet size
- 160 mm
- no of bags
- 100 Bags
- power hp kw
- 15 HP
- cloth area sq ft
- 100 sq.ft
- airflow m3 h or cfm
- 1000
- type of dust collector
- Portable Dust Collectors
- dust removal efficiency
- 90%
- inlet air speed fpm rpm
- 14000 RPM
Add Quantity
Description
The MS Portable Dust Collector, For Buffing/ Blending is a strong, simple machine built for buffing and blending work in factories. Mild steel forms the frame - the unit holds up under long hours of use. A 1500 CFM air stream pulls dust away from the worker plus keeps the area clear. A filter layer stops particles as small as 10 - 15 microns and clears about nine tenths of the dust from the air. The motor runs on 380 V, 50 Hz but also comes in sizes from 2 HP to 15 HP - a shop can pick the power that fits the job. The whole box measures one foot by one foot by three feet, sits on a trailer and rolls to any station. Eighty to one hundred filter bags line the inside as well as a 160 mm inlet feeds dusty air into them. The unit suits metal shops, mineral plants and powder-coating lines. An Indian firm that started work in 2010 builds each collector or ships it as a ready-to-use dust extractor.