Check Master B PR I9 (Fabric Inspection With Batching & Perfect Rolling) RS 1300000

OVERVIEW - PARAMOUNTCheckMASTER B + PR i9™ has a Wide viewing area to check the fabric thoroughly. It has Dual Light Sources : TOP Illumination to check the Dyeing and Printing Defects and Bottom Illumination to check the Weaving Defects Forward & reverse motion facility is provided to enable effective inspection. The Length of the Fabric inspected is directly displayed by the Length Counter. The Digital fault counter helps in counting the number of defects in the fabric. Emergency stop switch is provided to stop the machine suddenly in case of an emergency. The machine is elegantly finished in Blue and Grey Powder coating paint for impressive looks.SALIENT FEATURESErgonomically designed Fabric Inspection machine to make perfectly aligned Rolls at the back of the operator for convenience and ease in inspection. It can also take Batch Trolleys from back for continuous inspection.Suitable for Fabric Manufacturing Mills and Dyeing & Process Houses.Double Geared Motor along with advanced Programmable AC Frequency Drives for smooth running of the Fabrics. It also has another geared motor and advanced frequency drive for edge alignment unit. Two Modes of Inspection : Continuous or Inching facility.Light from TOP and BOTTOM to identify all type of Defects : Weaving, Dyeing and Printing Defects.Roller Type Length counter for accurate fabric length measurement.Digital fault counter to keep count of Faults in the Fabric. Working with Both Length and Fault counters the operator can easily keep note of all the faults and also know at which length the fault are coming. A special Tensioning device is provided to provide adjustable tension to the fabric during Inspection. With Emergency Stop facility to stop the machine at any time , as per the Safety and CE Norms. Complete with all accessories-tray for keeping loose fabrics, plastic pipes for rolling fabrics etc.Supplied with calibration & inspection certificates.TECHNICAL SPECIFICATIONSTwo Special Geared Motor : To Run the Fabric Smoothly3rd. Special Geared Motor : To operate the Edge Alignment Unit.Two Frequency Drive : Electronic Programmable Drive to Run the Fabric3rd. Frequency Drive : To Run the Edge Alignment Unit.Photo Sensors : To operate Edge Guiding System.BIG ROLLERS : 5 Nos. for smooth running of the Fabric.Small Stainless Steel Roller : 4 Nos. for smooth passage of the FabricEmergency Stop : In Front and Back side adhering to Safety Norms.Power Supply : 220/230 V, 50 Hz, Single phase AC SupplyMaximum Width : 72" Inches of fabric can be checkedLight source : LED Lights at Top & Bottom for Illumination Length Counter : Wheel Type, 0 – 99999 Meters (Least count 0.1 M)Fabric movement : Back to Front/ Front to BackSTANDARD ACCESSORIESMain Unit : 1 No.PVC Pipes : 2 No.User's Manual : 1 No.Calibration Conformance Certificates : 1 No.Inspection & Conformance Certificate : 1 No.