Panasonic CO2 Laser Marker

The high-grade LP-400 CO2 laser marker delivers, meeting needs ranging from marking to processing.High-speed marking at 700 cps Three times the productivity means you save time and equipment. Acceleration, deceleration and response speeds of the LP-400 series exceed those of previous models by at least 200 %. It is possible to mark on products that are moving rapidly. The LP-400 series that can mark 700 characters per second reduces tact time, leading to more than three times the productivity of previous models. Clear marking and high-quality processing Stability of laser output With a laser output stability of within ± 3 % (typ.)*, 10.6 μm 0.417 mil wavelength models work well in applications ranging from marking thin films and other tricky substrates to processing tasks such as removing insulation from cables. Short-wavelength laser Clear marking Well-matched to the heat absorption characteristics of plastics, the 9.3 μm* 0.366 mil wavelength laser allows marking on plastic surfaces by melting the surface layer without creating excessively deep marking and limiting damage to the substrate. This capability rectifies issues with previous models where deep marking would create pinholes or otherwise make marking output difficult to read. * LP-420S9 (20 W type)High-quality processing Short-wavelength laser radiation is readily absorbed by plastics, allowing the creation of sharp edges and increasing dimensional accuracy.