eB2BMart - B2B marketplace logo

Latapoxy 310 &

₹1,280

Seller : CIVILIZE MART

Specification

color
Off White
open time
Extended
tile type
Granite, Ceramic Tile, Vitrified Tile, Marble, Porcelain Tile, Glass Mosaic
availability
In Stock
adhesive base
Epoxy Based
product grade
MYK LATAPOXY 310
adhesive class
R2
packaging size
1 KG
application area
Wall
suitable location
Indoor & Outdoor
Add Quantity

Send Detailed Enquiry

Your enquiry will be sent to the supplier, for Latapoxy 310 &.

Qty

Description

91 000 74051 It's a two-component, high-strength epoxy adhesive / chemical anchoring bonding — not a simple cement-tile adhesive. It's designed for "spot bonding" — meaning you use dab/spots of this adhesive on the back of marble / stone / tile pieces, then press them onto vertical or overhead surfaces (walls, facades, etc.). It's especially used for natural stone, marble, granite, heavy tiles, large-format ceramic/slate work — anything where a strong, permanent, non-sag bond is required. �� Key Features & Advantages Strong permanent bond — once cured, the bond is very durable. Fast set time — standard version sets in ~45–60 minutes. Non-sag consistency — you can apply it on walls/vertical surfaces (even overhead), and it won't drip or run. Non-staining — safe for light-coloured stones, tiles, marble, so it doesn't leave visible adhesive marks. Resistant to shock, vibration, moisture, damp surfaces — good for exposed facades, external walls, or areas subject to stress. No mechanical anchors/clamps required — simplifies installation compared to mechanical fixing or continuous bedding adhesives. �� Where & When It's Generally Used Suitable for: Bonding marble, granite, natural stone slabs, large-format ceramic tiles on walls, facades, vertical surfaces, and overheads (e.g. cladding walls, exterior finishes). Fixing heavy stone/veneer slabs in places like stair risers, elevator lobbies, fireplace surrounds, exterior facades — anywhere regular thin-set adhesive might fail. Situations needing strong structural bonding rather than just surface-level tile adhesion (especially with heavy or large stones). �� How to Use It (Basics) It comes in two parts (Part A + Part B). Mix in 1:1 ratio by volume until uniform. Apply "spot-dabs" on the back of stone/tile (not full bed), then press onto prepared, clean surfaces (concrete, masonry, cement-backer board, steel, plywood, etc.). Good for vertical or overhead — due to non-sag property — and suitable even for exterior or damp surfaces (provided substrate is prepared properly).
Latapoxy 310 & - ₹1,280 - CIVILIZE MART - eB2bMart