eB2BMart - B2B marketplace logo

NCL CEROSTIK-T1 103 TILE ADHESIVE, Grade/Type: Type 1, 20 kg

₹390

Seller : CIVILIZE MART

Specification

color
Grey
coverage
~ 0.278 m² per kg (with 6 mm × 6 mm notch trowel).
use area
Internal walls & floors; can also be used for external covered areas with small-format tiles (within limits) per manufacturer.
brand name
NCL
grade type
Type 1
availability
In Stock
other traits
Polymer-modified, self-curing, relatively low-VOC compared to some adhesives.
packaging size
20 kg
packaging type
Usually 20 kg bags; some sources mention also 50 kg.
substrate types
Cement plastered walls/floors, cement concrete surfaces, cement screed.
application area
WALLS AND FLOORS
tile type suited
Small-format clay & ceramic tiles; works also for small-size vitrified tiles.
standard compliance
IS 15477
suitable for tile type
Ceramic Tiles
bed thickness adhesive thickness
0.3 cm
Add Quantity

Send Detailed Enquiry

Your enquiry will be sent to the supplier, for NCL CEROSTIK-T1 103 TILE ADHESIVE, Grade/Type: Type 1, 20 kg.

Qty

Description

91 000 74051 NCL CEROSTIK TI-103 is a cement-based, polymer-modified thin-bed tile adhesive. It's a pre-mixed dry powder adhesive: you just add water on site, mix and apply — no need for custom cement-sand mixes. It conforms to standard: IS 15477:2019 (Type 1) and also meets EN 12004 classification C1T. �� Technical Specs & Suitable Use Spec / ParameterDetail Tile type suited Small-format clay & ceramic tiles; works also for small-size vitrified tiles. Substrate types Cement plastered walls/floors, cement concrete surfaces, cement screed. Bed thickness (adhesive thickness) 3 mm – 10 mm. Coverage ~ 0.278 m² per kg (with 6 mm × 6 mm notch trowel). Packaging Usually 20 kg bags; some sources mention also 50 kg. Use area Internal walls & floors; can also be used for external covered areas with small-format tiles (within limits) per manufacturer. Other traits Polymer-modified, self-curing, relatively low-VOC compared to some adhesives. ✅ What It's Good For Installing ceramic/clay tiles in interior rooms — walls or floors. Good for bathrooms, kitchens, living areas (provided tiles suit). Jobs where you want a ready-mix adhesive (less site-work compared to cement-sand mortar), to save labour and get consistent quality. Projects where smaller tiles or standard-format tiles are used — since TI-103 is meant for small/medium tiles rather than heavy or large-format stone/tiles. Surfaces like cement plaster, concrete, screed, existing mortar beds — typical for Indian residential/commercial internal tiling. ⚠️ What to Consider / Where It May Not Be Ideal Not ideal for large-format tiles, heavy stone (granite/marble), or heavy-duty outdoor tiling — the product is meant for small/medium ceramic/clay tiles. For exterior or damp/wet exposed areas (like open terraces, pool-sides, heavy moisture zones) — unless conditions are controlled and tiles are small — better to use heavier-duty adhesive. As with any adhesive: substrate must be clean, level, dry, and free from dust/oil/loose plaster/paint before application. This ensures adhesion strength and durability.
NCL CEROSTIK-T1 103 TILE ADHESIVE, Grade/Type: Type 1, 20 kg - ₹390 - CIVILIZE MART - eB2bMart