NCL LFT ADHESIVE -TE 203 TILE ADHESIVE, 20 kg, Grey
₹7,600
Seller : CIVILIZE MART
Specification
- color
- Grey
- brand name
- NCL
- grade type
- Type 4
- availability
- In Stock
- packaging size
- 20 kg
- application area
- FLOORS AND WALLS
- standard compliance
- IS 15477
- suitable for tile type
- Vitrified Tiles
Add Quantity
Description
91 000 74051 NCL LFT Adhesive TE 203 is a cement-based, polymer-modified thin-bed adhesive from NCL, designed for fixing tiles/stones. It's supplied as a factory-premixed dry powder; on-site you just add water and mix (i.e. "single-pack, just-add-water" system) — no need for custom cement-sand mixes. It conforms to standards IS 15477:2019 — Type 4 and EN 12004: C2TS2. It is formulated especially for larger-format tiles and stones, including vitrified / porcelain tiles, slim tiles, marble, granite, engineered stones — suitable where high bond-strength and full bed coverage is needed. 🛠 Key Properties & Benefits Strong & durable bond — high tensile adhesion strength helps prevent debonding, hollow-sound issues or loose tiles over time. Water-resistant & suitable for wet / monsoon-prone conditions — TE 203 is advertised as water-resistant and impact-resistant, making it reliable for areas exposed to moisture/rain, e.g. bathrooms, balconies, external walls. Flexibility / Impact resistance — the polymer-modified formulation offers good flexibility, which helps accommodate minor substrate/tile movements without cracking or debonding. Versatile: Interior & Exterior, Floors & Walls & Cladding — usable on internal floors/walls, external walls, even external cladding (up to around 10 ft from ground level, per manufacturer) when done properly. Wide substrate compatibility — can be applied on cement plaster, concrete, screeds; also works on drywall boards, plywood, certain panels (for cladding), subject to primer/ substrate prep if needed. Full-bed application — thin-bed adhesive but formulated to ensure full contact under tile, avoiding hollow voids common with poor mortar-mix tile fixing. 📦 Technical / Application Details Tile / tile-type suitability: vitrified tiles, porcelain, slim tiles, large-format tiles/stones, marble / granite / engineered stones — especially materials with porosity < ~3%. Adhesive bed thickness: ~ 3 mm up to ~ 12 mm depending on application. Coverage: Approx. 0.278–0.306 m² per kg (with 6 × 6 mm notch trowel) — actual coverage depends on notch size, tile type etc. Packaging: Commonly available in 20 kg or 50 kg bags. 🏠 Where & When You Should Use TE 203 Use NCL LFT Adhesive-TE 203 when: Installing large-format tiles or heavy stone tiles / slabs (porcelain, marble, granite, engineered stone) on floors or walls. Working in wet or high-moisture zones, or in climates with heavy rainfall / monsoon — e.g. bathrooms, balconies, external walls, terraces (provided substrate is correct Expecting heavy traffic, impact, or heavy load conditions (entrances, corridors, commercial floors, etc.) where a strong, long-lasting bond is necessary. Building projects where you want reliable, factory-consistent adhesive performance rather than variable traditional cement-sand mixes. ⚠️ What to Check / Limitations / Good Practices Substrate must be properly prepared: level, clean, stable, free from dust/oil/loose particles before applying adhesive — as with any tile adhesive. Poor substrate prep reduces bond strength. For heavy stones / very large tiles, ensure full-bed application (not just spot-fixing) to avoid hollow spots under tile.