Fume Hood, Model: RSE-481

Fume Hood is fabricated out of a thick wooden board. These are designed so as to throw out all toxic/harmful vapors thus protecting costly instruments and the person working in the lab. Outer is finished with sunmica and inner epoxy painted or sunmica. Working table tops is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterweight. The unit is fitted with fluorescent light and a gas cock for gas/air supply. Socket with switches for the exhaust system and fluorescent light. Fume Hood Metallic: Fabricated out of thick single wall Metallic complete made of thick Mild steel/ CRC sheet duly powder coated. A work table is made of Granite stone/ Ceramic// Epoxy as desired duly laminated. Interiors painted and covered with FRP lining. T board. These are designed so as to throw out all toxic/harmful vapors thus protecting costly instruments and the person working in the lab. Single wall, without service lines. able top covered with Ceramic Tiles. Complete with blower, water tap, wash basin, front sliding door and built-in exhaust assembly suitable to be connected with 150mm dia PVC duct. Working table tops is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterweight. The unit is fitted with fluorescent light and a gas cock for gas/air supply. Product Details: 2' X 2' X 2' RSFH-2 3' X 2' X 2' RSFH-3 4' X2' X 2' RSFH-4 6' X 3' X 3' RSFH-6