Nitrogen Gas Spring, Stroke Length: 200 mm

Covers, lids or other components by hand without using an external energy source. Bansbach gas springs are individually filled to a predetermined pressure to suit a customer's requirement (extension Force F1). The cross-sectional area of the piston rod and filling pressure determines the extension force F = p*A. During the compression of the piston rod, nitrogen flows through an orifice in the piston. The nitrogen is compressed by the volume of the piston rod. As the piston rod is compressed the pressure increases, so increasing their action force (progression). The force depends on the proportional relationship between the piston rod and the inside tube diameter, which is approximately linear.Gas springs are universally accepted,wherever you want to Push, pull, lift, lower or position.