Hydraulic Angle Shearing Machines

The machine consists of a shear table, work-holding device, upper and lower blades, and a gauging device. The shear table is the part of the machinery that the workpiece rests on while being sheared. The work-holding device is used to hold the workpiece in place and keep it from moving or buckling while under stress.Hydraulic cutters utilize a hydraulic mechanism to close the scissors' hardened steel blades. Oil under high pressure (around 700 bar) is pumped to the movement mechanism to deliver enough power to cut even the hardest materials.Lower blade is always at 90°. 90° blades are called “four-edge” blades and can be turned to use all of its 4 edges. Angled blades are called “two-edge” blades and can be turned to use only 2 edges. Opposite edges have an angle greater than 90° and therefore cannot be used for shearing.