All Geared Medium Duty Lathe Machine
₹2,20,000
Seller : Shreyash Machine Tools
Specification
- type
- Lathe Machine
- model
- MD 215
- layout
- Horizontal
- work type
- Medium Duty
- bed length
- 6 Feet
- brand make
- ACCUMAX
- cross side
- 240
- type of bed
- Pedestal
- availability
- In Stock
- spindle bore
- 52 mm
- spindle nose
- 6TPI
- width of bed
- 28 cm
- length of bed
- 6 feet
- cross slide mm
- 240
- lead screw tpi
- 4 TPI
- power required
- 2 HP
- automatic grade
- Semi-Automatic
- spindle bore mm
- 52mm
- spindle threads
- 6 tpi
- width of bed mm
- 280
- height of center
- 21.2 cm
- height of centre
- 21.5 cm
- power required hp
- 2
- spindle speed rpm
- 45-1200
- max swing over bed
- 430 mm
- tail strock sleeve
- MT-4
- height of center mm
- 250
- max swing over side
- 240 mm
- max swing over bed mm
- 490
- spindle speed 6 r p m
- 40 -550
- max swing over side mm
- 320
- suitable electrical hp
- 2 hp
- taper in spindle sleeve
- MT-4
- tail stock sleeve travel
- 150
- range of transverse feeds
- 0.02 to 0.25
- range of longitudinal feeds
- 0.08 to 1mm
- lead screw diameter or pitch
- 32mm
Add Quantity
Description
The All Geared Medium Duty Lathe Machine built by Shreyash Machine Tools stands on a solid 6-foot bed. The bed allows a maximum swing of 430 - 490 mm above it and 240 - 320 mm above the cross slide - the lathe accepts a broad range of medium duty jobs. A 2 HP electric motor drives the spindle through six speed steps that span 40 - 1200 RPM. The hollow spindle accepts bar stock up to 52 - 80 mm in diameter and the tailstock taper fits MT-4 tooling for accurate drilling or reaming work. The machine follows a horizontal layout and carries a semi automatic feed system. Longitudinal feed rates run from 0.08 - 1 mm per revolution - transverse feed rates range from 0.02 - 0.25 mm per revolution. A 280 mm wide pedestal bed supports the entire assembly plus the spindle center sits 215 - 250 mm above the bed. A 32 mm lead screw with 4 - 6 threads per inch moves the carriage smoothly during threading cycles. The tailstock sleeve extends 150 mm - long workpieces remain stable. Units are in stock and ready for immediate delivery - the lathe performs precision turning, milling and facing operations in industrial workshops.