Karl Fischer Titrator, For Laboratory Use

Supplied with 250ml Reaction Vessel, Dual Platinum Electrode, Teflon Paddle Teflon Assembly , Moisture Trap for Reaction Vessel & 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos) , Teflon Tubing for Dispensing Path, Operational & Instruction Manual, Manufacturer Test Certificate and Warranty Card. Technical Specification : Method of Detection : Conductometric Backlit LCD Display : 16 x 2 Line Alphanumeric Range of Moisture Detection : less than 20 PPM to 100% Display of Reading in ml with minimum resolution : 0.01ml. Dispenser : Motorized Dispensing for low & accurate measurement of reagent. Electrode : Dual Platinum Electrode Stirring Time : 00:00 to 99:00 ( Minutes:Second ) - Users Adjustable End Point Time : 1-99 Seconds , Users Adjustable End Point Sensitivity of Moisture Detection : Users Adjustable Input : Electrode Connector Power supply : 230 VAC ± 10% , 50 Hz Salient Features : Metalic Epoxy Based Powder Coated Body Built in Magnetic Stirrer with soft touch Key Speed Controller Rugged Teflon Housing for holding Dual Platinum Electrode & Moisture Trap. Automatic end point detection with Audio Alarm. Auto Drain Facility for cleaning reaction vessel (Optional) OVER TITER Audio Alarm save KF Reagent Onsite Dispenser Calibration/Validation Facility. MOC of Dispenser is SS/ABS/TEFLON for Corrosion Protection & maintenance Free Operation. Flushing System for cleaning dispensing path. Optional : Auto Drain of Reaction Vessel Analysis Report : Report Date & Time : 12-FEB-2010 – 16:09 Company Name: ANALAB (VADODARA) Calibration Date & Time : 11-FEB-2010 – 23.34 Calibration Method: Water by Volume Average Titer Factor: 6.666666 Record Number: 00 Analysis Date & Time: 12-FEB-2010 – 16.00 Sample Type & Method: Liquid by Volume Volume of Sample (ml.)): 05.000 Density of Sample: 0.789 Stirring Time (Min:Sec): 00:00 End Point Time (Seconds): 20 End Point (ml.): 01.21 Moisture %: 000.2044 Moisture (PPM): 0002044.0 H2O (mg/ml): 003260.33