Mc Emceconcrete-guard Supplier Dealer Distributor in Mumbai, For Construction, Unit Pack Size: Bucket of 20 Litre

Emceconcrete-Guard Acrylic Polymer modified, Anti- Carbonation Coating for Concrete Product Properties • Protective coating for strained facades and concrete surfaces on the basis of modified pure acrylic dispersion. • Resistant to carbonation, Water repellent • Seamless membrane • Weathering and ultra violet (UV) resistant • Solvent free, safe and non-corrosive • Application by roller or spraying Areas of Application • Concrete protection system against aggressive pollutants. • Carbonation resistant coating for protection of new concrete, repaired concrete, old facades, etc. • Protective coating for concrete subjected to adverse climatic conditions like in Tunnels, cooling towers, chimneys, bridges, Jetties Etc • Protective coating for strained concrete facades due to hair cracks, crazing and shrinkage cracks Application Notes General Emceconcrete-Guard system is specially designed for protection of concrete. It is an elastic membrane forming material based on acrylic polymers and selected mineral fillers. EmceconcreteGuard is water based and therefore retains the breathing capacity of concrete Advantage The product has low water Vapour diffusion and high resistance to diffusion of carbon dioxide. The coating acts as protection against carbonation of concrete or other cementitious facades / elements. The most important characteristic of Emceconcrete-Guard is that it has crack bridging properties, which can be taken advantage of in case of repair and protection to cracked facades, exhibiting hairline and shrinkage cracks Surface Preparation A primer coat of Emceconcrete-Guard Primer is required for adhesion and sealing of the surface. Emceconcrete-Guard is supplied in white color. Some shades can be made available for large surface areas. Pigments and color stains can be added to obtain different decorative shades. Two coats are normally recommended under usual conditions. More coats offer higher degree of protection and better crack bridging properties. Surface preparation should be conducted as per painting rules. Surfaces should be free from oils and fats for better bonding. The surface to be coated must comply with the principles of building construction and should fulfill structural requirements. The surface should be firm, clean, and free from fats, oil, grease, dust or any other contamination Fine cracks of this kind are often detectable only in the presence of moisture so dampen surface before examining dry facades. Such hairline cracks and fine shrinkage cracks are generally to be found on the surfaces only. By application of additional coats of Emceconcrete-Guard, the crack bridging ability of the system can be increased as crack-bridging is a function of the thickness of the coats involved Flaky old paintwork must be completely removed. Smoothen the base with mortar or Nafuquick readymade mortar. Unpainted surfaces should be primed with Emceconcrete-Guard Primer, consumption 7-8m2 / L i t /per-2-Coat-Subsequent coats of Emceconcrete-Guard can be applied by roller, brush or spraying in two coats at a consumption of 6 - 7 m2 /Lit/Coat for a thickness of 100 to 120 microns. This product is fully compatible with solvent free PCC system for the Protection, Repairs and Maintenance of Concrete Structures. Please request details.