Two Zone Spilit Tube Furnace 1400 DEGREE

Features:- ¨ The furnace material is vacuum-formed alumina ceramic fiber Blanket material and does not drop powder and sinter without volatile in high temperature, Green, safety and comply with international standards ¨ The heating element is made of High-Quality Silicon Carbide Heating Element Rod, which can bear large load, stable and long service life; the rods are evenly arranged on both sides of the furnace, and the temperature field uniformity is good ¨ Patented temperature control design, fast heating rate, good temperature uniformity ¨ High precision of temperature control, small temperature compensation and temperature accuracy ± 1 ° C. ¨ Using intelligent PID temperature control instrument, with program function, can set the temperature rise curve, can be Set 1 program 16 segments ¨ Electronic Components Are Used Such as Autonics / Schneider / L&T Brand, its Safe and Reliable ¨ The heating rate is fast, from room temperature to 1150 degrees, generally takes 120 minutes ¨ The machine will send out an alarm signal to the over-temperature during the working process, and automatically complete the protection action ¨ When the instrument program is set, just press the run button and the next work will be completed automatically. Product Overview:- 1400℃ SZSTF Series products are mainly applied for the heat treatment of samples under vacuum or protective atmosphere, Quality Kanthal A1” wire in Coil Form is used for heating element, and the temperature controller uses PID control module to achieve precise temperature control and constant temperature requirements. The product uses the new-type ceramic fiber material as the furnace chamber material; the furnace tube material is corundum, and the tube is sealed by stainless steel flanges on its both ends, the furnace can be work under the vacuum atmosphere condition, there are air inlet and air outlet on the flange, also it can be filled in protective air, the precision needle-valve may adjust the air inlet flow rate. Specification:- Type Tube Furnace Furnace Structure Chamber Material, Temperature Controller System, Heating Element, Furnace Shell And Other Assistant Parts. Max Temperature 1400℃ Continue Operating Temp. 1350℃ Heating Element Silicon Carbide Heating elements Chamber Material High Temperature Zirconia Grade Ceramic Fiber Material Temperature Accuracy ±1℃ Thermocouple K Type Temperature Controller PPI (India) PID Controller Can Program 1 Group 16 Segments Electronic Component Autonics / Schneider / L&T Electronics Brands Heating Rate ≤ 1-5℃/Min (Suggest1-5℃/Min for Longer Life Using of Furnace) Safety Protection Overheat And Thermocouple-Break Alarm Certification NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED Furnace Shell High Quality GI Sheet With PP Powder Coated Insulation High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material to Ensure a Good Uniformity Accessories One Pair of High Temperature Furnace Gloves One No of Bot Tong and Operational Manual Optional Quartz / Alumina Bot With Accessories: - Accessories :- Alumina Tubes (for upto 1700°C application)(1 No.) High Purity Alumina Tube 99.9%. High Purity Alumina Tube can withstand up to 1700 Degree Centigrade temperature. Alumina tubes can withstand very high thermal shock (1700 Degree Centigrade to Room Temperature). Alumina tubes can withstand vacuum up to 10(-1) Torr. Quartz Tube Size: (OD 70 mm /ID 60 mm/ Length 700 mm) All dimensions are in mm. Tolerance upto 24mm OD: +/- 0.2 mm in OD and ID. Tolerance beyond 24mm OD to 70 mm OD: +/- 0.5 mm in OD and ID Tolerance beyond 70 mm OD: +/- 1.5 mm in OD and ID Rotameter –Acrylic body 6”to8” long (1 No.) Range: 50CCM to 500CCM, Gas: ArgonInlet/Outlet connector – Horse OR Ferrule OR fitting. Aluminium Flange: - Aluminium Flanges with Silicon O – Ring & Vacuum Gauge for Vacuum or Gas purging application Harrier Offer matching Aluminium flanges. These flanges are made as per tube dimension to avoid any leakage of vacuum or gas during application. All Dimensions are in mm. Inner Diameter 70.5 mm Tolerance beyond 24 mm OD to 70 mm OD: ± 0.5 to 1 mm in OD and ID Model Hot Zone Length 1 Hot Zone Length 2 Power Supply HE-STF-1400P 300 mm 300 mm 220 V/ 5 KW Single Phase