Material: Stainless Steel NBC Taper Roller Bearing, Bore Size: 15 mm, 105 mm

Product Details: Taper Roller bearings are generally separable, which means the cone assembly, consisting of the inner ring with roller and cage, can be mounted separately from the cup (outer ring). Being separable, mounting becomes easier. The projection lines of all the taper surfaces (Cup, Cone, and Roller) meet at a common point on the bearing axis, called the apex point, ensuring proper rolling motion of the roller on the track surfaces of cone and cup. NBC manufactures Single and Double Row Taper roller bearings in Inch and Metric series. These bearings are mainly used in Wheels, Transmissions and Axle Centres of Passenger Cars, MUVs, Trucks, Tractors, Earthmovers, etc. where RPM is moderate and combination loads (i.e. simultaneously both axial and radial loads) are prevalent. Taper Roller Bearing Types And Characteristics: Taper roller bearings can take both axial and radial loads. The axial load carrying capacity of the bearings is largely determined by the contact angle α as shown in the figure below. If the contact angle α is larger, then the axial load carrying capacity is higher and vice versa. Taper roller bearings are designed in such a way that vertices of the cone for each roller and those for the inner and outer raceways coincides on the bearing axis or extensions of the raceways and rollers converge at a common point on the axis of rotation. This results in true rolling motion of the rollers on the raceways at every point along the rollers. The taper roller bearings support radial loads and axial loads from one direction only. The line contact between rollers and raceways provide the bearings with a high load carrying capacity.