AK-U0-RJ45-TB2P-AB
₹2,432
Seller : JRM SOLUTIONS
Specification
- brand
- Allen Bradley
- usage
- 3; 2 (RS232); 1 DH485
- npg etra
- Point-to-point isolator; RS-232 to RS-485 isolator; RS-232 to half-duplex user mode ASCII isolator
- ip rating
- 500VDC
- lan category
- Cat 6
- mounting type
- usb
- connector gender
- selector switch
- country of origin
- Made in India
- connector orientation
- 0 - 60 DegreeC (32 - 140 DegreeF)
Add Quantity
Description
Product DescriptionThe AIC+ advanced interface converter provides a communication link between various networked devices. The AIC+ interface converter is compatible with a variety of SLC and MicroLogix controllers and peripherals.MicroLogix 1000, 1200, and 1500 controllers provide power to the AIC+ interface converter via the RS-232 8-pin mini-DIN port's cable. However, if a MicroLogix controller is not connected to this port, a 24V dc power supply connected to the converter's external power terminals is required. The dc power-source selector switch needs to be set for your particular configuration. The communication-rate selector switch is used to match the communication rate filter of the AIC+ interface converter to the network communication rate. This switch does not change the network communication rate and is normally left in the AUTO position. In high noise environments, the communication-rate selector switch should be taken out of the AUTO mode and set to the same communication rate as the network.