ULTRA TECH Tilefixo Shine Tile Cleaner (1 L)
₹150
Seller : CIVILIZE MART
Specification
- form
- Ready to Use
- brand
- ULTRATECH
- color
- Pink
- features
- Fast Acting
- shelf life
- 12 Months
- availability
- In Stock
- suitable for
- TILES
- packaging size
- 1 L
Add Quantity
Description
91 000 74051 "TileFixo Shine Tile Cleaner" is a tile-cleaning / stain-removal liquid marketed under the TileFixo/UltraTech line — not an adhesive or grout. It's described as a powerful acid-based tile cleaner meant to clean and restore tiles by removing hard stains, cement / grout haze, rust/mineral deposits, efflorescence, grime — and bringing back the tile's original shine. ��️ Where & How It's Used Suitable for ceramic tiles, vitrified tiles, glazed tiles, glass-mosaic tiles — basically tile surfaces used in floors or walls. It is typically used for post-construction cleaning (after tile installation — to remove cement/grout residue), or for maintenance cleaning (to remove stains, rust, mineral deposits, efflorescence, general dirt) on tiled surfaces. Comes in liquid form and sold in containers (commonly 1 L or 5 L) as per listing. Effective stain removal and cleaning power — capable of removing tough stains, cement/grout residue, mineral deposits that ordinary water or soap cannot. Restores tile shine — helps bring back the original luster/finish of vitrified/glazed/ceramic tiles after construction or long use. Suitable for variety of tiles — works on ceramic, vitrified, glazed, glass-mosaic tiles — but as with any acid-based cleaner, one must ensure the surface is compatible. ⚠️ Things to Check / Use Carefully Because it's described as acid-based, it may not be suitable for acid-sensitive surfaces — e.g. unglazed natural stone, marble, terrazzo, some metal finishes, or surfaces that can corrode/etch under acid. This is typical for acid-based tile cleaners (though I couldn't find a public TDS warning explicitly covering all those cases). Always follow instructions: apply as per manufacturer's directions, ensure adequate dilution (if needed), use gloves/ventilation, and rinse thoroughly after cleaning to avoid residue or damage. Test on a small area first — before using on entire floor/wall — to ensure tiles are not discolored, etched or damaged by the cleaner (especially if tiles are glazed, vitrified, or have special finishes). �� When It's Useful After tile installation — to remove cement, grout residues, dust and restore shine. Periodic deep-cleaning of tiled floors/walls (kitchen, bathroom, balconies) especially where stains, hard-water marks, rust, mineral deposits accumulate. Renovation / maintenance jobs where tiles have become dull or their finish degraded by grime, cement slurry, mortar haze, etc.