Devcon Titanium Putty

Devcon Titanium Putty Product Description: Devcon Titanium Putty is a high performance, titanium reinforced epoxy engineered for making critical repairs to machinery and precision parts Features and Benefits: Temperature resistance to 176 Degrees Centigrade Excellent chemical resistance Compression strength of 124 MPa Qualifies under mil spec DOD-C-24176B Non-rusting, machinable to metallic finish Restore bearing housings and scored shafts Rebuild wear rings, hydraulic rams and valves Repair equipment and parts that require a machined finish Typical Physical Properties Cured 7 days @ 24 % Solids by Volume: 100 Cured Shrinkage ASTM D2566: 0.0010 cm/cm Pot life at 24oC (0.5kg mass): 21 minutes Compressive Strength ASTM D695: 129.8 MPa Adhesive Tensile Shear ASTM D1002: 13.8 MPa Cured Hardness Shore D ASTM D2240: 87D Dielectric Strength, volts/mm ASTM D149: 2205 Temperature Resistance: Wet 66 Degrees Centigrade/ Dry 177 degrees centigrade 5% Bleach (Sodium Hypochlorite) - E, 10% Phosphoric Acid VG 5% Trisodium Phosphate - E, 10% Sulphuric Acid F 10% Sulphuric Acid - E, 10% Sodium Hydroxide E 50% Sulphuric Acid � E, 50% Sodium Hydroxide E 10% Hydrochloric Acid � E, 5% Alum (Aluminium Sulphate) E 0% Nitric Acid � U, 10% Acetic Acid - U KEY: E = Excellent, VG=Very Good, F-Fair, Unsatisfactory Devcon Titanium Putty are very good in water, saturated salt solution, leaded gasoline, mineral spirits, ASTM #3 Oil and propylene glycol. Epoxies are generally not recommended for long term exposure to concentrated acids and organic solvents Surface Preparation for Devcon Titanium Putty: Proper surface preparation is essential to a successful application.