Fosroc Nitobond EP Base Resin, Packaging Size: 1/2, 1 And 4 Litre

UsesFor bonding new cementitious materials to existing cementi-tious surfaces. For use on horizontal surfaces and on vertical surfaces where mortar or concrete can be supported by form-work. Ideal for extensions and repairs to structural concrete in buildings, loading bays, bridges, roads, bonded or granolithic floor toppings etc.AdvantagesMore overlay time Enables to place the concrete upto 6 hrs after applying Nitobond EP, without risk of delamination. High bond strength Bond strength is more than the tensile strength of good quality concreteBarrier coat Acts as a 'barrier coat' to the migration of chloride ions from host concrete. Nitobond EP is based on solvent free epoxy resins containing pigments and fi ne fi llers. It is supplied as a two part material in preweighed quantities for ready onsite mixing and use. Col-oured components - white base and green hardener - provide visual evidence that adequate mixing is achieved. MixingThe entire contents of the hardener can should be poured into the resin container and the two materials thoroughly mixed until a uniform colour is obtained. To facilitate application at temperatures below 10 0 C the separate components should be warmed in hot water to a maximum of 25 0 C before mixing.We Prefer buyers only from Telangana & A.P States.