Superflex Eco Kerakoll Tile Adhesive, Bucket, 4 Kg

Superflex Eco:- Category: Organic Mineral products Fixing ceramic tiles and natural stone Rating: Eco 2 ECO Note:- Formulated with locally-sourced minerals meaning lower greenhouse gas emission during transportation Improved on-site safety guaranteed Product Strengths:- Floors and walls, for internal and external use Open and adjustability time ≥ 30 min. Suitable for vitrified tiles, ceramics, large formats, low thickness slabs and natural stone Ideal for marble and natural stone that tends to form stains and sag in the presence of humidity Ideal for resin-based engineered stones Easy and light to spread thanks to the Light Work technology Area Of Use:-Use: High-elasticity adhesive for fixing of ceramic tiles, vitrified tiles, marble and natural stone, on floors and walls, on absorbent and nonabsorbent, deformable surfaces. Materials: Vitrified tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, natural stone, marble, granite and recomposed materials also subjected to staining or deformation due to water absorption and thermal expansion. Surfaces:- Mineral screed Mineral screeds made with Biocem mineral binder Cement-based screeds Prefabricated concrete or fresh concrete castings Cement plasters and cement-lime mortar Floors and walls in polyurethane resin, glazed tiles, cement-based and resin floor tiles, porcelain tiles Wood, metals, rubber, PVC, linoleum, glass surfaces Internal and external flooring and walls, in domestic, commercial and industrial applications, for street furniture, underfloor heating systems, work surfaces in industrial settings or in laboratories, swimming pools, Turkish baths, thermal water baths and fountains, also in areas subject to freezing. Fixing to sheet metal used for prefabricated bathrooms, on worktops and kitchens, balconies, terraces, flat roofs and domes. Do Not Use:- In contact with polystyrene or on substrates which are not fully cured and subjected to moisture rising. Preparation of Substrates:- Substrates must be compact and consistent, free from dust, oil and grease, free from any rising damp, with no loose, flaky, or imperfectly anchored parts. The surface must be stable, without cracks and have already completed the curing period of hygrometric shrinkage. Uneven areas must be corrected with suitable smoothing and finishing products. Preparation:- Superflex Eco is prepared by mixing together parts A and B from the bottom upwards, using a low-rev (≈ 400/min.) helicoidal agitator, respecting the preset ratio of 3.2 : 0.8 of the packs. Pour part B into the bucket containing part A, being careful to mix the two parts uniformly until a smooth, even coloured mixture is obtained. The user must mix a quantity of adhesive which can be consumed within 1 hour at +23 °C / 50% R.H. Packs of Superflex Eco must be stored at a temperature of ≈ +20 °C for at least 2/3 days prior to use. Application:- Superflex Eco must be applied with a suitable, toothed trowel of the type and dimensions most appropriate for the format and type of tiles used. Using the smooth part of the trowel, apply a fine layer of product, pressing down onto the surface in order to ensure maximum adhesion. Press down each tile to allow for maximum coverage of the surface. In environments subjected to heavy traffic, in external applications and wherever high-elasticity fixing system is required, use the double-spread technique to ensure 100% application of the product to the rear of the tiles.