XBee 2MW Series 2C Wire Antenna, 250 Kbps
₹3,466
Seller : Shreemay Enterprises
Specification
- adc inputs
- (4) 10-bit ADC inputs
- encryption
- 128-bit AES
- digital i o
- 10
- availability
- In Stock
- rf data rate
- 250 Kbps
- i o interface
- 3.3V CMOS UART, ADC, DIO
- frequency band
- 2.4 GHz
- supply voltage
- 2.1 - 3.6VDC
- transmit power
- 1.25 mW (+1 dBm) / 2 mW (+3 dBm) boost mode
- antenna options
- Chip, Wire Whip, U.FL, RPSMA
- receive current
- 38 mA / 40 mA boost mode @ 3.3VDC
- ids and channels
- PAN ID, 64-bit IEEE MAC, 16 channels
- serial data rate
- 1200 bps - 1 Mbps
- transmit current
- 35 mA / 45 mA boost mode @ 3.3VDC
- indoor urban range
- 133 ft (40 m)
- power down current
- <1 uA @ 25degrees C
- configuration method
- API or AT commands, local or over-the-air
- interference immunity
- DSSS (Direct Sequence Spread Spectrum)
- operating temperature
- 40C to +85degrees C
- reliable packet delivery
- Retries/Acknowledgments
- receiver sensitivity 1 per
- -96 dBm in boost mode
- outdoor rf line of sight range
- 400 ft (120 m)
Add Quantity
Description
Product Decsription: XBee and XBee-PRO ZB embedded RF modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors*. Products in the XBee family are easy to use. They require no configuration or additional development; users can have their network up and running in a matter of minutes. Programmable versions of the XBee-PRO ZB module make customizing ZigBee applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security. XBee modules are available in a variety of protocols and frequencies. The common hardware footprint shared by Digi's XBee modules means users can substitute one XBee for another with minimal development time and risk. Features: Interoperability with ZigBee compliant devices* No configuration needed for out-of-the-box RF communications Common XBee footprint for a variety of RF modules ZigBee mesh networking protocol - Improved data traffic management - Remote firmware updates - Self-healing and discovery for network stability Programmable versions of the XBee-PRO ZB enable custom ZigBee application development - 8-bit Freescale™ S08 microprocessor brings intelligence to devices - CodeWarrior® development tools for easy customization